Modeling of agricultural drought risk pattern using Markov chain and GIS in the western part of Bangladesh

The aim of the study is to assess the agricultural drought risk condition in the context of global climate change in the western part of Bangladesh that covers about 45% area of the country for the period of 1960–2011. Drought Index (DI) and Drought Hazard Index (DHI) have been calculated by Markov Chain analysis and that of Drought Vulnerability Index (DVI) from socioeconomic and physical indicators. The DI values show that the northern part in general is more drought-prone, having less crops prospect, whereas the southern part is less drought-prone with high crop potentiality. The probability of extreme drought occurrence increases in recent decades in some parts as a result the drought events become more frequent in the areas. The DHI ranges from 15 to 32, and northern part suffers from more extreme drought hazards than that of southern part. DVI also indicates that northern part is exposed to high to very high drought vulnerability as higher percentage of illiterate people are involved in agricultural practices and high percentage of irrigation to cultivable land, but southern part exposed to moderate to low vulnerability because of low values of vulnerability indicators. Finally, agricultural drought exists at high risk condition in northern part and low in southern parts and 21.63, 26.54 and 29.68% of the area poses very high, high and moderate risk, respectively. So, immediate adaptation measures are needed keeping in mind climate features like rainfall and temperature variability, drought risk and risk ranking to make viable adaptation measures.     

High Toughness and Fast Crystallization Poly(Lactic Acid)/Polyamide 11/SiO<Subscript>2</Subscript> Composites

A poly(lactic acid) (PLA)/polyamide 11 (PA11)/SiO₂ composite was mixed from PLA, PA11, and nanosilica particles through twin-screw extrusion. The PLA/PA11/SiO₂ composite was evaluated with tensile and Izod impact tests, light transmission and haze measurement, and isothermal and nonisothermal crystallization behavior determinations. The PLA/PA11/SiO₂ (97.0/3.0) composite had approximately 10.8% less ultimate tensile strength than neat PLA, but it had greater ductility and approximately ninefold greater elongation at break. A dimple morphology was observed on the fractural surface of the PLA/PA11/SiO₂ composite, indicating that the incorporation of PA11 and nanosilica particles increased the ductility of the PLA matrix. PLA with less than 3 wt% of PA11 and 0.5 phr of nanosilica particles had an Izod impact strength of 8.72 kJ/m². PA11 and nanosilica particles effectively toughened this PLA polymer; they accelerated both isothermal and nonisothermal crystallization rates and increased the crystallinities of the resulting composites under isothermal and nonisothermal crystallization processes.     

From mixed farming to intensive agriculture: energy profiles of agriculture in Quebec,Canada, 1871–2011

Regional Environmental Change - This article presents an energy analysis of Quebec agroecoystems at five periods of time: 1871, 1931, 1951, 1981, and 2011, calculating for each year the various...     

Changes in motorcycle-related injuries and deaths after mandatory motorcycle helmet law in a district of Vietnam

Objective: Our study measured the change in head injuries and deaths among motorcycle users in Cu Chi district, a suburban district of Ho Chi Minh City.

Methods: Hospital records for road traffic injuries (RTIs) were collected from the Cu Chi Trauma Centre and motorcycle-related death records were obtained from mortality registries in commune health offices. Head injury severity was categorized using the Abbreviated Injury Score (AIS). Rate ratios (RRs) were used to compare rates pre- and post-law (2005/2006–2009/2010). Cu Chi's population, stratified by year, age, and sex, was used as the denominator.

Results: Of records identifying the transportation mode at the time of injury, motorcyclists accounted for most injuries (3,035, 87%) and deaths (238, 90%). Head injuries accounted for 70% of motorcycle-related hospitalizations. Helmet use was not recorded in any death records and not in 97% of medical records. Males accounted for most injuries (73%) and deaths (88%). The median age was 28 years and 32 years for injuries and deaths, respectively. Compared to the pre-law period, rates of motorcycle injuries (RR = 0.53; 95% confidence interval [CI], 0.49–0.58), head injuries (RR = 0.35; 95% CI, 0.31–0.39), severe head injuries (RR = 0.47; 95% CI, 0.34–0.63), and deaths (RR = 0.69; 95% CI, 0.53–0.89) significantly decreased in the post-law period.

Conclusions: Rates of head injuries and deaths among motorcycle riders decreased significantly after implementation of the mandatory helmet law in Vietnam. To further examine the impact of the motorcycle helmet law, including compliance and helmet quality, further emphasis should be placed on gathering helmet use data from injured motorcyclists.     

Personal exposure to fine particulate matter concentrations in central business district of a tropical coastal city

In the present study, personal exposure to fine particulate matter (particulate matter with an aerodynamic diameter <2.5 μm [PM_2.5]) concentrations in an urban hotspot (central business district [CBD]) was investigated. The PM monitoring campaigns were carried out at an urban hotspot from June to October 2015. The personal exposure monitoring was performed during three different time periods, i.e., morning (8 a.m.?9 a.m.), afternoon (12.30 p.m.–1.30 p.m.), and evening (4 p.m.–5 p.m.), to cover both the peak and lean hour activities of the CBD. The median PM_2.5 concentrations were 38.1, 34.9, and 40.4 µg/m³ during the morning, afternoon, and evening hours on the weekends. During weekdays, the median PM_2.5 concentrations were 59.5, 29.6, and 36.6 µg/m³ in the morning, afternoon, and evening hours, respectively. It was observed that the combined effect of traffic emissions, complex land use, and micrometeorological conditions created localized air pollution hotspots. Furthermore, the total PM_2.5 lung dose levels for an exposure duration of 1 hr were 8.7 ± 5.7 and 12.3 ± 5.2 µg at CBD during weekends and weekdays, respectively, as compared with 2.5 ± 0.8 µg at the urban background (UB). This study emphasizes the need for mobile measurement for short-term personal exposure assessment complementing the fixed air quality monitoring.

Implications: Personal exposure monitoring at an urban hotspot indicated space and time variation in PM concentrations that is not captured by the fixed air quality monitoring networks. The short-term exposure to higher concentrations can have a significant impact on health that need to be considered for the health risk–based air quality management. The study emphasizes the need of hotspot-based monitoring complementing the already existing fixed air quality monitoring in urban areas. The personal exposure patterns at hotspots can provide additional insight into sustainable urban planning.     

Life cycle assessment tool of electricity generation in Portugal

This paper investigates multi-stakeholder arrangements initiated by businesses and NGOs from the North that aim to enhance a more sustainable agricultural production at specific localities in Southern countries. We aim to better understand the search for concerted action in multi-actor arrangements. Therefore, this paper presents a diagnostic framework with three strategic challenges the partnership projects are facing: linking global economic objectives to local needs, values and interests; bridging public and private interests and responsibilities; and seeking trade-offs between social, environmental and economic values. Starting from the partnerships’ Theory of Change, this diagnostic framework is applied to comparative case studies of partnership projects in the cocoa sector in Indonesia, which are part of a Northern-based public–private partnership to improve farmers’ prospective. It is concluded that the economic reality faced by the farmers differs from that of the Northern actors; collaboration with governments is difficult because of different organizational cultures; and the partnership projects underestimate the strength of vested social relations the smallholders are part of. Overall, the initiators of the partnerships seem to work with a too restricted economic interpretation of the local reality.     

Discrete-choice experiments valuing local environmental impacts of renewables: two approaches to a case study in Portugal

Despite the often mentioned environmental benefits associated with transition from fossil fuels to renewable energy sources, their use for electricity production has non-negligible negative environmental impacts. The most commonly mentioned in surveys concern different types of landscape impacts, impacts on the fauna and flora, and noise. These impacts differ by size and location of plants, and by source of energy, rendering the policy decision complex. In addition, there are other welfare issues to take into consideration, as positive and negative environmental impacts are not evenly distributed among population groups. This paper proposes to compare the welfare impacts of renewable energy sources controlling for the type of renewable as well as the specific environmental impact by source. To this end, two discrete-choice experiments are designed and applied to a national sample of the Portuguese population. In one case, only individual negative impacts of renewables are used, and in another case, the negative impacts interact with a specific source. Results show the robustness of discrete-choice experiments as a method to estimate the welfare change induced by the impacts of renewable energy sources. Overall, respondents are willing to pay to reduce the environmental impacts, thus making compensation for local impacts feasible. Moreover, the estimations reveal that respondents are significantly sensitive to the detrimental environmental effects of specific renewable energy sources, being willing to pay more to use these sources of energy relative to others.     

Transfer of Graphene CVD to Surface of Low Density Polyethylene (LDPE) and Poly(butylene adipate-co-terephthalate) (PBAT) Films: Effect on Biodegradation Process

Here, the influence of graphene as a coating on the biodegradation process for two different polymers is investigated, poly(butylene adipate-co-terephthalate) (PBAT) (biodegradable) and low-density polyethylene (LDPE) (non-biodegradable). Chemical vapor deposition graphene was transferred to the surface of two types of polymers using the Direct Dry Transfer technique. Polymer films, coated and uncoated with graphene, were buried in a maturated soil for up to 180 days. The films were analyzed before and after exposure to microorganisms in order to obtain information about the integrity of the graphene (Raman Spectroscopy), the biodegradation mechanism of the polymer (molecular weight and loss of weight), and surface changes of the films (atomic force microscopy and contact angle). The results prove that the graphene coating acted as a material to control the biodegradation process the PBAT underwent, while the LDPE covered by graphene only had changes in the surface properties of the film due to the accumulation of solid particles. Polymer films coated with graphene may allow the production of a material that can control the microbiological degradation, opening new possibilities in biodegradable polymer packaging. Regarding the possibility of graphene functionalization, the coating can also be selective for specific microorganisms attached to the surface.     

H∞ loop-shaping controller design for a grid-connected single-phase photovoltaic system

This paper presents a H_∞ loop-shaping controller for controlling dc-link voltage by regulating the switching signal of the inverter associated with a grid-connected single-phase photovoltaic system. To facilitate a robust control design, state-space realisation of the system model is made with uncertainties represented by linear fractional transformation. The controller is achieved through H_∞ synthesis followed by obtaining desired loop shapes through the choice of the proper weighting functions. The controller order is reduced by Henkel-norm method for facilitating its practical implementation. Controller performance is evaluated through carrying out simulations on MATLAB/Simulink platform under standard and changing atmospheric conditions, and fault condition.     

An integrated approach for assessing the migration behavior of chlorpyrifos and carbaryl in the unsaturated soil zone

Chlorpyrifos (O, O-diethyl O-3,5,6-trichloropyridin-2-yl phosphorothioate) and carbaryl (1-naphthyl methylcarbamate) are often applied concurrently as insecticides in food production. The aim of this study was to research their migration behavior in a real environment. We researched the leaching of both pesticides by setting up field lysimeters on a farm with the typical soil used in fruit production today. In order to analyze the variables involved in this process, we performed complementary adsorption studies, we performed complementary adsorption studies using batches and undisturbed soil laboratory columns for both compounds. The results for pesticide transport through the lysimeters showed that less than 1% of chlorpyrifos was recovered in the leachates, while almost 17% was recovered for carbaryl. Having completed the experiment in undisturbed laboratory columns, soil analysis showed that chlorpyrifos mainly remained in the first 5 cm, while carbaryl moved down to the lower sections. These results can be explained in view of the sorption coefficient values (K_D) obtained in horizons A and B for chlorpyrifos (393 and 184 L kg^?1) and carbaryl (3.1 and 4.2 L kg^?1), respectively. By integrating the results obtained in the different approaches, we were able to characterize the percolation modes of these pesticides in the soil matrix, thus contributing to the sustainable use of resources.